DEZICHEM-M-AdBlue

Measuring system for road tankers and containers for the delivery of AdBlue and other chemical liquids with Europe-wide examination certificate
Certificate No.: DE07-MI005-PTB010

At the distribution of AdBlue, the delivered quantity has to be determined precisely according to the calibration law in order to be able to balance the delivery correct.

Especially for the delivery of chemical liquids, attention has to be paid that the appropriate materials are used for the measuring system. For DEZICHEM-M, all materials that are in contact with the product are made of stainless steel V4, Viton (flange seals) or Teflon and are therefore optimally appropriate.

DEZICHEM-M thus satisfies the criteria of Quality Assurance Guidance Document AUS 32 according to DIN 70070 created by the European urea producers (AGU).

The measuring system DEZICHEM-M is certified for the delivery of chemical products from a conductibility of 5μS and a viscosity of 120mPa.s on. For the delivery of AdBlue, the software of DEZICHEM-M - since 2001 type-approved by the PTB (national metrological authority) - was adapted to the specific requirements.

Possible versions:

• Delivery via gas pressure
• Delivery via pump
• Dry hose delivery
• Wet hose delivery

It is the aim of this compact measuring system to achieve the highest possible delivery performance (short holding time).

DEZICHEM-M is tailored to the demands in practice: small and compact in its dimensions and therefore appropriate for the installation in new trucks as well as re-fittings.

The measuring system is delivered completely assembled. A simple operation makes work easy for even untrained drivers.

It is possible to pre-select a desired quantity in order to fill containers, e. g. IBC containers.

Delivery stops automatically at the chosen quantity. With a flow rate of up to 600l/min, even big quantities can be unloaded within a short time.

Options

• Switching wet hose - dry hose

Free choice of delivery via wet hose and dry hose at each delivery

• Emergency stop button

Alternative 1: emergency stop button with optical alarm
Alternative 2: emergency stop button with optical and acoustical alarm

Technical data

Magnetic inductive measuring method
smallest admissible measure quantity 200l

Nominal diameter measuring system and volume counter DN 50

Maximum flow rate 600l/min
Minimum flow rate 60l/min
Delivery pressure max. 4bar

Electronic degaser
Product lines made of stainless steel

Indicating, storing and operating unit
Approved ticket printer

Dimensions of the measuring system:
Length = 680 mm
Width = 410 mm
Height = 660 mm
Total weight approx. 45 kg